ULTICLIP PRODUCT COMPARISON

Initial Use of Ulticlips

Ulticlips are made with tight tolerances.  Upon initial use you may find your clip requires more strength to open and close it.  After you open and close your clip 40-50 times you will find that the process becomes easier.  We recommend applying a wax-based lubricant after initial use so that your clip continues to work smoothly.  See the care and maintenance sections below to better understand how to lubricate your clip.

Mounting Templates

Download and print a mounting template to check for size and hole spacing.

UltiTuck

The UltiTuck combines 3 great features into 1 clip. It replaces most two hole horizontally mounted clips while providing the additional features:

  • Tuckable design – The innovative design transforms a traditional holster into a tuckable holster.
  • Beltless carry – The Ultituck is built around the Ulticlip patented locking system which allows for beltless carry
  • Adjustable cant –  Two T shaped slots allow for adjustable cant and variable mounting hole widths of .60″ to 1″

UltiTuck provides the same great retention and concealment as found in the original Ulticlip.  Verify the UltiTuck has the right mounting option for your application by printing our mounting template.

Learn how to install the UltiTuck.

 

Each ULTICLIP is fabricated from heat treated spring steel to provide unmatched retention and durability. The high carbon content within the steel can make the ULTICLIP susceptible to oxidation. To minimize the likelihood of oxidation, each ULTICLIP receives a military grade, black oxide finish. It is recommended that you still wipe your ULTICLIP down with your favorite protective lubricant after extended use or after being exposed to harsh conditions that could promote oxidation. If you notice excessive friction after extended use, it may be necessary to reapply a wax type lubricant. Wax lip balm works extremely well. Watch the following video to see how to apply wax lubricant.

Regular inspection and maintenance of your ULTICLIP product is essential. In the event you find your ULTICLIP product to be loose, worn, damaged or ineffective, cease use immediately and replace. Do not modify your ULTICLIP product. Any modifications could result in a failure to function as designed.

UltiLink

The UltiLink, is a Rapid Attachment, Modular Linking System that allows for swift attachment, removal, and reattachment of Molle gear, sheaths, mag carriers, and other items. The UltiLink’s modular system makes it easy to transfer items between Molle, duty vest, belts, packs and from person to person.

The composite and stainless steel lock offers 12 angles of attachment making horizontal, vertical, and diagonal carry possible. Quickly remove, relocate, and reattach your gear with the UltiLink.

Expansion packs are made to complement the UltiLink complete kit. The UltiLink complete kit will allow up to 2 different items to me interchanged and carried with one Lock unit.  Increase the number of items you can carry or interchange by purchasing the Expansion Pack that fits your need.

To help with installation we have divided instructions by the bag numbers showing each application.  Watch all videos to better understand installation or pick the bag number you would like more information about.

Ulticlip Slim

The SLIM 2.2 and 3.3 are identical in all aspect except length. Both versions are .60″ wide making them ideal for narrow applications. Watch the video below to better understand the difference between the 2.2 & 3.3.

The Ulticlip SLIM is designed like our original Ulticlip. The instructions for clamping and removing the SLIM are the same as our original Ulticlip. Follow the instruction in the video to properly clamp and remove the Ulticlip SLIM.

The SLIM is designed to provide a maximum clamping thickness of .12″inch. That is the equivalent of approximately 4 layers of denim material. Using ULTICLIP on materials exceeding .12″ inch can damage and negatively affect it’s ability to clamp.

Each ULTICLIP is fabricated from heat treated spring steel to provide unmatched retention and durability. The high carbon content within the steel can make the ULTICLIP susceptible to oxidation. To minimize the likelihood of oxidation, each ULTICLIP receives a military grade, black oxide finish. It is recommended that you still wipe your ULTICLIP down with your favorite protective lubricant after extended use or after being exposed to harsh conditions that could promote oxidation. If you notice excessive friction after extended use, it may be necessary to reapply a wax type lubricant. Wax lip balm works extremely well. Watch the following video to see how to apply wax lubricant.

Regular inspection and maintenance of your ULTICLIP product is essential. In the event you find your ULTICLIP product to be loose, worn, damaged or ineffective, cease use immediately and replace. Do not modify your ULTICLIP product. Any modifications could result in a failure to function as designed.

Ulticlip & Ulticlip3+

ULTICLIP and ULTICLIP3+ are the same length and width. Both versions are equipped with our patented retention and concealment design. The only main difference between ULTICLIP and ULTICLIP3+ is the mounting bracket area.

  • ULTICLIP – We recommend ULTICLIP as our best retrofit version. ULTICLIP gives you several mounting options and is capable of replacing many holster clips. ULTICLIP can be used to replace traditional holster clips that use a retention slot. This type of clip is most commonly found on leather or nylon holsters. ULTICLIP also has a single hole that allows it to replace holster clips that use a single point attachment. To better understand the holsters that ULTICLIP fits you can watch the video located below under the title, “Will ULTICLIP work with my holster?”
  • Ulticlip3+ – The mounting area of ULTICLIP3+ is primarily designed so that holster manufactures can better incorporate it into their products. The flat multi-hole mounting area allows for dual point attachment and the ability change ride height. You can download and print our Ulticlip3+ mounting template to verify if ULTICLIP3+ is the right choice for your holster.

ULTICLIP has a dual mounting bracket. It can replace screw on and retention type holster clips. The different types of holsters that will work with ULTICLIP can be seen in the video.

Installing ULTICLIP is a quick and simple process. Watch our video to learn how to replace your current holster clip with ULTICLIP.

Follow the instruction in the video to properly clamp and remove ULTICLIP.

ULTICLIP is designed to provide a maximum clamping thickness of 1/4 inch. That is the equivalent of approximately 7 layers of denim material. Using ULTICLIP on materials exceeding 1/4 inch can damage and negatively affect it’s ability to clamp.

Each ULTICLIP is fabricated from heat treated spring steel to provide unmatched retention and durability. The high carbon content within the steel can make the ULTICLIP susceptible to oxidation. To minimize the likelihood of oxidation, each ULTICLIP receives a military grade, black oxide finish. It is recommended that you still wipe your ULTICLIP down with your favorite protective lubricant after extended use or after being exposed to harsh conditions that could promote oxidation. If you notice excessive friction after extended use, it may be necessary to reapply a wax type lubricant. Wax lip balm works extremely well. Watch the following video to see how to apply wax lubricant.

Regular inspection and maintenance of your ULTICLIP product is essential. In the event you find your ULTICLIP product to be loose, worn, damaged or ineffective, cease use immediately and replace. Do not modify your ULTICLIP product. Any modifications could result in a failure to function as designed.

UltiClip XL

ULTICLIP XL has multiple mounting slots It can replace many screw on holster clips. Download the Ulticlip XL mounting template to check for proper hole alignment, length and width.

Mounting Template>>

Watch our video to learn how to remove the multi-tool and how to maintain Ulticlip XL.

ULTICLIP XL is relatively maintenance free. We recommend wiping down ULTICLIP XL with your favorite rust protective lubricate after extended use or after being exposed to harsh conditions that could create rust.

A wax metal lubricant was applied to ULTICLIP XL when manufactured. If you note excessive friction after extended use then it may be necessary to reapply a wax lubricate. Wax lip balm works extremely well. Watch the following video to see how to apply wax lubricate.

Regular inspections and maintenance by you of your ULTICLIP product is essential. In the event you find your ULTICLIP product to be loose, worn, damaged or ineffective, cease use immediately and replace. Do not modify your ULTICLIP product. Any modifications could result in failure to function as designed.

The Ulticlip XL multi-tool has a 1/4″, 5/16″, 3/8″ wrench and a flat blade screw driver. The video below shows some of the functions of the multi-tool.

Follow the instruction in the video to properly clamp and remove ULTICLIP XL.

ULTICLIP XL is designed to clamp around a belt or directly to clothing. When clamped directly to clothing the maximum clamping thickness is 1/4 inch. That is the equivalent of approximately 7-8 layers of denim material. The maximum clamping thickness around a 1.5″ wide belt is 3/8″. Using ULTICLIP on materials exceeding 1/4 inch or around a belt thicker than 3/8″ can damage and negatively affect it’s ability to clamp.

See the video below to better understand the maximum clamping thickness.

Download the Ulticlip XL manual & mounting template.

Crux Concealment System


The Crux is a fully customizable concealment system.  It applies additional leverage by rotating the holster and the grip of the gun towards the user’s body, creating better concealment and less “printing” of the firearm.  The Crux can be mounted for both right or left-handed carry. Its modular design allows each user to customize it to fit their need for concealment.Each Crux Concealment System comes complete with:
  • Crux concealment plate
  • Adjustable compression tab
  • 2 – 1/4” screws & posts
  • 2 – 3/8” screws & posts
  • 2 – 1/16” rubber spacers
  • 2 – 1/8” rubber spacers
  • 2 – 1/2” screws

*The included screw kit will work with most holsters.  If you need additional mounting hardware you can purchase our 48 piece screw kit.

Download and print the mounting template to check size and hole alignment.

Warranty – Refunds – Returns & Shipping

Ulticlip is proudly made in the U.S.A and comes with a 30 day money back guarantee.

Warranty

We guarantee our products to meet your complete satisfaction for 30 days from the date of purchase.  If for any reason you are not satisfied with our product within the first 30 days follow our Warranty and Return Procedure instructions to receive a refund, less shipping and restocking fee. All original packaging and components must be returned for a full refund. Missing and/or excessively worn items may be subject to a 50% restocking fee.

Disclaimer of Warranty

ULTICLIP products, when properly used and maintained, can provide years of satisfactory performance. It is, however, impossible for ULTICLIP to prevent abuses of our products. Therefore, ULTICLIP products are sold “as is” and “with all faults.” ULTICLIP makes no express or implied warranties on the sale of our products outside of our 30 day satisfaction guarantee.

Disclaimed from the sales transaction are all warranties of merchantability or fitness for the intended use, either expressed or implied. Also disclaimed from the sales transaction is any liability for incidental or consequential damage resulting from the use of an ULTICLIP product. The buyer, and not ULTICLIP, assumes the entire risk as to the quality and performance of the product. Also, the buyer, and ULTICLIP, is responsible for determining the suitability of the product for the intended use.

In the event you find your ULTICLIP product is loose, worn, damaged or ineffective, you as the buyer assume the entire risk of all necessary servicing or repair. If you have a question regarding your ULTICLIP products or ULTICLIP policies, please contact ULTICLIP by using the contact form located on our website.

Request A Refund >>

Refunds

All claims of return merchandise must be made within 30 days of date of purchase. No refunds or returns will be accepted after 30 days from the date of purchase.  If a product needs to be returned within the first 30 days you must follow the instructions as outlined in the “Return Procedure” section below in order to receive a full refund.

All packaging, postal and tracking fees related to returned products are assumed by the buyer.  ULTICLIP does not reimburse or refund the cost of packaging or mailing returned item(s).

Returns are not accepted for items that have been physically altered. All original packaging and components must be returned for a full refund. Missing and/or excessively worn items may be subject to a 50% restocking fee.

Return Procedure – Failure to completely follow the instructions listed in this section may negate your refund.

1. Pack and mail the item(s) via the United States Postal Service. It is required that a tracking number be acquired at the time of shipping.

Mail returned items to:
ULTICLIP – Returns
11870 Fox Lake Road
Orrville, OH 44667

2. After mailing your item(s) fill out the “Warranty & Return Form” that is located under a separate tab at the top of this page.  You will be required to provide the tracking number of the item(s) you mailed when filling out the form.  If no tracking number is provided you risk not receiving a refund.
3. Once your package arrives and is processed by our Warranty and Return department we will issue a refund or exchange the defective item(s).
4. You will be notified by email once your refund has been issued or your replacement item has been shipped.  Refunds or exchanges are typically issued within 5 business days once a package has been received.

Request A Refund >>

In-stock items are shipped within 3 business days. If an item is out of stock the buyer will be contacted with an estimated shipping date.  If the buyer is not in agreement to wait for the out of stock item to ship, then a full refund will be issued. Free or discounted shipping offers only apply to products shipped within the continental United States of America.

Packages are shipped via the USPS.  Orders are typically delivered within 4-8 business day from date of purchase.

Miscellaneous

ULTICLIP has great dealer incentives and will add value to your business! We are focused on primarily being a dealer based product. Join our team of dealers throughout the USA and around the world. Incorporate ULTICLIP into your product line and offer your customers the versatility of the ultimate carry solution. Request information and secure your dealership with ULTICLIP today!

Complete the form and a ULTICLIP Representative will contact you regarding our dealer program and wholesale pricing. Once approved you will receive a password to access the “Dealer Account Setup” page. Upon creating an account you will have instant access to Authorized Dealer pricing in our store.

**$300 minimum per order for wholesale pricing. *

Dealer Inquiry Form >>

Mailing Address
Ulticlip
10627 S. Homan Ave.
Chicago, IL 60655

Telephone
1-888-600-CLIP